Weight per gal: 12.1# ASTM D-1475 This is a very dense, not watered down product for maximum density, build, yield and durability.
Solids Weight: 72% ASTM D-2369 Water is light, resins and pigments are heavier.
Solids Volume: 58% ASTM D-2697 High build and high yield due to low water content.
Versus Typical Paint: PaintOnce Coating is a resin-rich material that outperforms typical paint in durability, adhesion, flexibility, film build, and overall long term performance.
Flammability: ASTM D-2863 Non-Flammable and does not support combustion on cement surfaces.
Finished Film: Smooth with good flow and leveling to prevent brush marks.
Viscosity: Heavy bodied for good film build per coat yet easy to apply by roller or sprayer. 20-25Kcps (20,000+ centipoise) Brookfield viscometer.
Tint Base Availability: Pastel/Medium and Deep for a wide range of color tinting options while using a minimum of colorants which could adversely affect dry times.
Product Stability: Product remains stable and usable for one year or longer depending on ambient storage environment.
Toxicity: Non-Toxic nor is it a health hazard when used as directed. Contains NO Lead or Chromium.
Hardness: Product cures to a tough, yet flexible wear resistant surface while preventing chipping.
Abrasion Resistance: Extremely resistant to typical environmentally induced abrasion.
Touch-up: Easy to touch up and repair in the event of extraordinary damage.
Co-Product Availability: PaintOnce Ceramic Coating is designed for use over the PaintOnce Primer. Other clear sealants are available for shingle roofs, exposed aggregate and other substrates requiring beautification and protection.
Impact Resistance: Exceeds 20 inch pounds of impact with no effect.
Elongation: ASTM D-2370 Exceeds 200% elongation with 100% memory.
Flexibility: ASTM D-1737 Exceeds 1/8” mandrel bend with NO cracking, chipping or flaking.
Dirt Pickup: PaintOnce Coatings have a soft sheen that prevents dirt and stains better than flat finish paints or coatings. The surface is tighter and special additives repel stains and dirt for a beautiful look… longer.
Vapor Transmission: ASTM D-1654 Twenty (20) perms allow water vapor to leave the film but prevent water liquid from entering through the coating film.
Wind Driven Rain: NO water penetrated a 12 dry mil film during 24 hours propelled by a 98 mile per hour wind!
Salt Spray Resistant: ASTM D-1654 Exceeds 250 continuous hours with no evidence of peeling, blistering or film deterioration.
High Humidity Resistant: Exceeds 250 continuous hours with no evidence of peeling, blistering or delamination from the substrate.
Fungus/Mildew Resistant: NO Growth after inoculated with 4 active microorganisms in an extremely high humidity environment.
Weathering: ASTM D-822 / G-26 No deterioration of the coating film, no cracking, chalking, blistering or peeling after simulated 20 year weathering cycle.
Composition: Single component Urethane modified Acrylic which requires no thinning or post added components for use.
Coverage Benefit: High build at 100 sf/gal/coat on smooth surfaces in a two coat process. Porous surfaces require more coating.
Dry Film Yield: One coat at 18 wet mils yields 10 dry mils of durable protection. 2 coats recommended.
Substrate Preparation: Clean, dry, solid, primed surfaces yield GREAT results and incredible adhesion.
Application Temp Range: Best applied at 450F to 950F for greater daily coating application and production.
Application Methods: Brush, roller or airless sprayer for larger areas.
Cure Time (tack-free): Dependent on Relative Humidity and temperature for air drying, between 10 minutes and 30 minutes.
Cure Time (primary): Dependent on Relative Humidity and temperature for air drying, between 24 to 36 hours.
Cure Time (Complete): Dependent on Relative Humidity and temperature for air drying, between 7 to 10 days.
Solvent System Used: Safe, pure water. No other solvents or additives required to accomplish extraordinary results.
Adhesive Strength: ASTM C-794 Exceptional Adhesion to properly prepared and primed substrates.
Cohesive Strength: Exceptional Cohesive strength for strong inter-coat adhesion to itself.
Color Reproduction: Can be tinted to over 5000 colors with clear reproduction and consistent tint strength.
Sunlight Stability: Contains no Vinyl additives or resins that can yellow with age and exposure to UV light.
Texture: PaintOnce Coating yields a beautiful, smooth satin finish that hides imperfections in the underlying substrate and leaves a pleasing soft finish.
Purity: Filtered for easy airless spraying without clogs.
